25KG DURACEM SUPER RENDER 3 IN 1 (CAP MATAHARI)
25KG DURACEM SUPER RENDER 3 IN 1 (CAP MATAHARI)
RM2.50 - RM22.00
Category:
BUILDING MATERIALS
Quantity: 100
Select variant(s): 25KG DURACEM SUPER RENDER 3 IN 1
25KG DURACEM SUPER RENDER 3 IN 1:
Quantity:
Pre Mixed With Cement , Sand & Plaster
Just add water and ready to use
SUPER RENDER 3 IN 1 (331)
Cap Matahari Super Render is a high quality cementitious render specially formulated for brick walls, hollowblock walls and concrete surfaces. It is intended to replace conventional cement-sand render. It is suitable for interior or exterior wall plastering and for brick laying purposes.
MIXING AND APPLICATION
Remove loose particles, grease and traces of foreign materials that may affect adhesion. Dry absorbent surfaces should be moistened before application of Super Render. Mix 1 bag (25kg) of Super Render with approximately 7.5L of water and mix thoroughly with an electric mixer or drum mixer for 3-7 minutes until the desired homogeneous paste is achieved. Use the mixture within 1 hour of mixing.
A polymer modified cement based thin render
Specially designed to correct surface alignment and imperfections
With a single application thickness of 6 - 12 mm.
Coverage (app.): 1.65 kg/m²/mm
Can be troweled to sponge finish.
To be used on concrete, cement rendered wall, hollow block, brick walls and aerated light weight block.
Ceramic tiles and natural stones can be fixed on finished surface.
Just add water and ready to use
SUPER RENDER 3 IN 1 (331)
Cap Matahari Super Render is a high quality cementitious render specially formulated for brick walls, hollowblock walls and concrete surfaces. It is intended to replace conventional cement-sand render. It is suitable for interior or exterior wall plastering and for brick laying purposes.
MIXING AND APPLICATION
Remove loose particles, grease and traces of foreign materials that may affect adhesion. Dry absorbent surfaces should be moistened before application of Super Render. Mix 1 bag (25kg) of Super Render with approximately 7.5L of water and mix thoroughly with an electric mixer or drum mixer for 3-7 minutes until the desired homogeneous paste is achieved. Use the mixture within 1 hour of mixing.
A polymer modified cement based thin render
Specially designed to correct surface alignment and imperfections
With a single application thickness of 6 - 12 mm.
Coverage (app.): 1.65 kg/m²/mm
Can be troweled to sponge finish.
To be used on concrete, cement rendered wall, hollow block, brick walls and aerated light weight block.
Ceramic tiles and natural stones can be fixed on finished surface.
Inquiry - 25KG DURACEM SUPER RENDER 3 IN 1 (CAP MATAHARI)